← Sản phẩm & ứng dụng
Tài liệu vật liệu cho liên kết quan trọng
Báo cáo vật liệu EN 10204 3.1 cho bu lông công nghiệp
Hướng dẫn hồ sơ kiểm tra vật liệu cho bu lông cấy và đai ốc LOKRON dùng trong thiết bị áp lực, van và dự án EPC.
EN 10204 Type 3.1Heat number traceabilityChemical analysisMechanical test results
Tóm tắt nhanh
An EN 10204 Type 3.1 inspection certificate records conformity with the purchase order and links chemical, mechanical and hardness results to the material heat number.
Phạm vi tiêu chuẩn và cung ứng
| Covered products | ASTM A193 B7/B8/B16, ASTM A320 L7 and ASTM A194 heavy hex nuts, subject to the purchase specification. |
|---|---|
| Traceability fields | Product, quantity, size, grade, heat number, lot identification and document number. |
| Test records | Chemical composition, tensile/yield/elongation, hardness and impact results where specified. |
Ứng dụng điển hình
- ✓PED pressure equipment and flanged joints
- ✓Industrial valve and EPC procurement
- ✓Oil, gas and petrochemical maintenance
Tài liệu có thể cung cấp
- ✓Signed EN 10204 Type 3.1 MTR
- ✓Heat and lot traceability statement
- ✓Chemical and mechanical test results
Tài liệu kỹ thuật liên quan
Cần cấp vật liệu, bản vẽ hoặc bộ bu lông hoàn chỉnh?
Gửi tiêu chuẩn, kích thước, số lượng, lớp phủ và điều kiện làm việc để LOKRON xác nhận trong 24 giờ.
Yêu cầu báo giá kỹ thuậtCâu hỏi thường gặp
What does an EN 10204 3.1 certificate prove?
It documents conformity with the order requirements and reports test results for the supplied material.
Is an MTR the same as a PED certificate?
No. The MTR is material evidence; PED conformity depends on the applicable pressure-equipment assessment and documentation.